Your present position:Home > Products > Jack Series >

Mechanical lifter

Detailed Introduction
一, Application
Lifting machine, mechanical Jack is hand-operated lifting tool, can serve as the top and cross in a variety of engineering crane lifting effect. It plays excellent role to improve work efficiency, reduce labor intensity. The product design is reasonable, simple operation, flexible and reliable, widely used in factories, warehouses, docks, railways, construction of a stack of origin, especially in mobile installation and all kinds of machinery and equipment, locomotive repair, lifting weights etc..
二, How to use
Everything is normal to use
1,Select the placement for the product according to the center of gravity of the weight, not overturned when lifting;
2, the lifting and landing must take the area of the board or foot carrying all contact with the weight, in order to make sure there is enough strength to prevent drop weight;
3, the ground of place should be strong, should added a pad block under the base and place the product in the center position of the cushion block when the surface is relatively soft
4, should empty swing from low to high to check whether there is stuck or abnormal condition before use.

Technical parameter:
Specifications 1.5t 3t 5t 10t 16t 20t 25t
Rated load(kg) 1500 3000 5000 10000 16000 20000 25000
Test load(KN) 22 44.1 73.5 147 176 220 275
Hand pull at full load(n) 190 196 235 431 580 650 750


Dimension parameter:

Specifications 1.5t 3t 5t 10t 16t 20t 25t
Main dimension (mm) A 81 83 108 124 135 135 155
B 100 130 140 140 150 150 200
C 600~900 720-1090 737-1095 794-1175 180-1130 880-1180 950-1360
D 60~360 70-425 87-445 100-481 115-425 115-425 110-520
E 55 60 71 86 85 85 90
F 46 45 68 76 85 85 90
G 110 138 170 170 182 182 230
H 225 249 249 300 330 330 330
K 147 170 190 252 281 281 380
R 119 140 155 185 224 224 212
S 166 235 217 187 202 202 205
T 113 128 128 250 258 258 258
Net weight(Kg)   16 20 28 46 72 72 91

RELATED PRODUCTS